Commercial and Industrial Gates — Gold Coast and Tweed Heads

Custom-fabricated gates and Centsys automation for strata, transport yards and light industrial sites. One QBCC-licensed crew from the fabrication to the callback.

A commercial gate almost always fails at the motor. Put a residential unit on a strata driveway and it runs four hundred cycles a week on a rating built for forty. It holds up for a year. Then it starts needing a callback a month. The replacement costs more than the right motor would have in the first place.

If you look after a strata block, a transport yard or a light industrial site, the gate is infrastructure. It opens for a truck at 5am and shuts behind the last car at night, every day. Nobody should have to think about it. We fabricate the gate and fit the automation under one QBCC licence, number 15461059. One crew owns the gate, the motor, the safety gear and the callback.

Ask for the duty cycle before you compare prices

Duty cycle is how much work a gate motor is rated to do in a day before it needs to stop and cool. A residential motor is built around a handful of openings. A commercial motor is built to run and keep running, with a bigger gearbox, better heat handling and components rated for the cycles the site will put through them.

Three quotes can land within a few hundred dollars of each other and be three completely different motors. So ask every installer the same two questions. What is this motor rated to do in a day? And how many cycles do you expect this gate to see? If a quote can’t answer that, nobody has sized the motor to the site. They’ve priced a gate and left the rest to luck.

Get the answer in writing. It’s the cheapest thing you can do before you sign anything.

The motors we specify for commercial sites

We fit Centsys and only Centsys.

  • D6 / D10 Industrial — high-cycle commercial sliding motors for larger gates and busier sites. The D10 handles gates up to 1000 kg. These are the units we specify for strata, transport yards and light industrial
  • Centsys Vantage — swing gate motor for single and double leaf gates, rated for residential and light commercial duty, with soft start and soft stop
  • D5 Evo — sliding gates up to 500 kg. The right call on a small site with light traffic. Underspecified for a shared driveway

On brand, we’ll be straight with you. We don’t service or fit BFT, Nice, FAAC or anything else. Running one brand means the spares are already on the van, the diagnosis is faster and the warranty sits with us rather than with a supplier in the middle. If your site is locked to another brand, we’d rather tell you now than halfway through.

Gate types that suit a commercial opening

  • Sliding track gates — the default where there’s a run-off length beside the opening. The locked motor acts as a solid brake, so the gate is hard to force open by hand
  • Cantilever gates — no ground track, so there’s nothing for gravel, silt or a dropped pallet to jam. Worth the extra steel on a yard with truck traffic or a driveway that floods
  • Telescopic gates — panels stack together, so a wide opening works on a narrow frontage where a single slider would need twice the run-off
  • Dual sliding gates — two leaves bi-part from the middle and halve the opening time. Useful where vehicles stack on a busy street waiting to get in
  • Swing gates — where there’s clear arc inside the boundary and the traffic is light

Everything is fabricated to the opening rather than cut down from a stock panel, in Colorbond, aluminium slat, vertical batten or tubular aluminium, powder coated to your colour, on marine grade stainless hardware and posts set plumb in footings sized for the motor load.

Access when more than one person uses the gate

A home gate needs two remotes. A commercial gate needs a way to let in a tenant, a cleaner, a courier and a delivery driver without handing out hardware you never get back. Every install can be specified with:

  • Wireless keypad for code entry at the gate, no trenching back to the building
  • GSM module for temporary access codes over standard SIM data, with no app subscription
  • Wired or video intercom integrated into the gate controller during the install
  • Mobile app control for gate limits, speed and auto-close
  • Solar power kit where there’s no practical mains run
  • Battery backup, so the gate still works in an outage. A 7Ah unit gives roughly 20 operations, a 12Ah unit around 35 to 50
  • Wireless safety beams and extra remotes

Compliance and the handover

Every automated gate we install gets an AS/NZS 4505 compliance check before we hand it over. Photocell beams, soft start and stop, obstacle detection that stops the gate when anything breaks the line. On a site with staff, tenants or public traffic that matters more than it does on a private driveway.

We’re QBCC licensed (15461059) and fully insured. You’re welcome to check the licence on the QBCC register before you book anything. The install carries a 12 month warranty and the Centsys manufacturer warranty is registered to the property.

Repairs, takeovers and motor replacement

We service, repair and replace Centsys motors that were fitted by other crews or have reached the end of their working life. It’s a standalone service and it doesn’t require us to have installed the original gate or fence.

Common jobs are motor replacement (control board, gearbox or the full unit), battery replacement, safety beam recalibration, remote re-pairing and seasonal service on D3, D5, D10 and Vantage units. We carry the common Centsys spares on the van, so most visits get fixed first time. Same answer on brand as above. Centsys only.

The rest of the boundary

Gates are most of what we do. The fence usually comes with them. We install Colorbond, aluminium and slat and privacy screening to match the gate, so the boundary reads as one job rather than three trades. For a home driveway, see automatic gates or access gates instead.

Where we work

Gold Coast, the Tweed Coast and Northern NSW, north as far as Coomera. That includes Southport, Robina, Burleigh, Helensvale, Coomera, Palm Beach, Tweed Heads, Banora Point, Kingscliff and Casuarina.

Commercial gate FAQs

Do you do commercial gates or only residential?

Both. We carry and install the full Centsys residential and commercial range. The D6 and D10 industrial motors are the ones specified for strata, transport yards and light industrial sites.

What’s the biggest gate you can automate?

The D10 handles sliding gates up to 1000 kg. We size the motor to the gate weight, the slope and the number of cycles the site will see, so the weight on its own doesn’t decide it.

Will you service a gate motor we already have?

Yes, as long as it’s a Centsys unit. We service, repair and replace Centsys motors regardless of who fitted the original gate. We don’t work on BFT, Nice, FAAC or other brands.

How long does an install take?

A standard sliding or swing retrofit is usually commissioned and handed back in a single day on site. Bigger commercial jobs, or installs that need trenching across a paved driveway, can run to two days.

What happens to the gate in a power cut?

It keeps working if you’ve specified battery backup. A 7Ah unit gives roughly 20 operations during an outage, a 12Ah around 35 to 50, depending on gate weight.

Are you licensed? Is the quote fixed?

QBCC licence 15461059, fully insured. We measure free and come back with an itemised written quote at a fixed price, so the accessories and the trenching are line items rather than a surprise at invoice time.

Get the gate sized properly

Tell us the opening, the site and roughly how many times a day the gate will cycle. We’ll measure it free and come back with an itemised written quote, with the motor and its rating named on the page.

Get a free measure · call 0476 170 060 · sales@coastfencingandgates.com.au

Speak withus today!

We service Northern NSW, Tweed Coast, Gold Coast, and North as far as Coomera. Speak with our friendly team today and organise a free measure & quote.

Get a quote

QBCC / 15461059

© 2026 Coast Fencing & Gates. All rights reserved – Designed with creativity by Idesign Collective

This field is for validation purposes and should be left unchanged.

Pool Fencing        Colorbond Fencing       Automatic Gates          Timber Fencing          Aluminium Fencing         Access Gates