Access Gates - Gold Coast & Tweed Heads
Thinking about adding a gate?
A gate adds privacy from the street, security against the casual opportunist who turns into the driveway and a contained space for the kids and the dog. It finishes a fence run that otherwise looks unfinished, and quietly lifts the resale value of a property that reads deliberate at the boundary rather than half done.
Every installincludes
- Custom fabrication to your boundary specification and material
- Material and colour matched to your existing or new fence
- Stainless steel hinges, lockable latches, and drop bolts
- Self closing soft close hinges available on request
- Posts plumb set in concrete footings, sized for future motor load if requested
- Powder coat or stain finish to match the surrounding fence
- Hardware warranty as standard
- Ready for future Centsys automation without rework
Gate Options
Browse the possibilitieswith Coast Fencing & Gates
Single Pedestrian Gate
900 mm to 1200 mm wide, single leaf, the standard side access point on most residential properties. Matches the fence profile beside it.
Double Pedestrian Gate
1500 mm to 2400 mm wide, two leaves, used where wider pedestrian or maintenance access is needed without going to a full driveway gate.
Driveway Swing Gate
Single or double leaf, 2.5 m to 4 m total opening. Suits properties with room to swing the leaves inward. Pre engineered for future Centsys Vantage automation.
Driveway Sliding Gate
Manual sliding gate on a low profile ground track, 3 m to 6 m total opening, ideal where there isn't room to swing a gate inward. Pre engineered for future Centsys D3, D5, or D10 automation.
Vertical Batten Gates
Vertical aluminium batten gates with wider profile battens than slat fencing, fabricated to match an existing vertical batten run. Architectural front yard or driveway treatment.
Custom Installs
Mixed material designs (concrete pillars with aluminium infill, timber posts with Colorbond panels, laser cut decorative screens) for architecturally led properties.
Privacy & a lifetime of security.
A gate you don't have to think about. One less thing between you and the driveway.
Matched to your fence
Same material, same colour, same capping profile, same hardware finish. The gate reads as part of the boundary line, not as a different thing bolted into the middle of it.
Marine grade stainless hardware
Hinges, latches, drop bolts, and lock cylinders are all marine grade stainless as standard, not an upgrade. Built for Coast salt air.
Future automation
Every driveway gate we build is sized and hung to accept a future Centsys motor without rework. Manual today, automatic tomorrow, no rebuild and no second crew.
Fabrication
We build every gate ourselves rather than subcontracting it out. The same team measures, fabricates and installs.
QBCC licenced
The hands that quote your job are the hands that build it and the hands that install it. No subcontractors, no handovers & no chase ups.
Fixed priced quoting
Written, itemised and fixed before fabrication begins. The figure on the quote is the figure you pay.
Colorbond Steel
Matched to the panel and capping profile of your Colorbond fence run. Powder coated steel frame, sheet infill in any of the 14 BlueScope residential colours.
Aluminium Slat
Horizontal or vertical slat infill in marine grade powder coat, custom spaced to match the parent fence. Won't rust, low maintenance, salt air rated.
Vertical Batten Aluminium
Wider rectangular batten profile in marine grade powder coat, square or rectangular section. Pairs cleanly with modern architectural homes.
Tubular Aluminium
For pool zones and front yard runs, the same tubular profile used in our aluminium pool fencing. AS 1926.1 compliant where the gate sits inside a pool barrier.
Custom slat and batten gates
The slat and batten gates we fabricate are sized to match the parent fence run, but the profile width itself is a design choice that shapes how the gate reads from the street. Wider profiles read as architectural and deliberate; tighter profiles read as traditional and finer grained. Most of our gates pair with a 65 mm or 90 mm slat for the cleanest match against an existing fence, with the full batten range available for front yard and feature gates.
Horizontal Slat
Modern · BandedVertical Slat
Picket StyleVertical Batten
ArchitecturalRecent Installs
A small selection of recent jobs across the Gold Coast & Tweed Heads.
Feel free to read our 5 star reviews and view our projects gallery.
Our Process
Quote to installation,a seemless process
A simple process with no surprises, no sudden variations. Just clean work, properly and honestly explained.
01
Site Visit
We attend the property, measure the boundary, confirm height conditions against council requirements and walk through capping, colour and gate options.
02
Itemised Quote
A written, fixed-price quote covering panels, posts, capping, gates and colour. The price you sign is the price you pay.
03
Install & finish
Existing structures are removed where applicable, footings and fixings prepared to manufacturer specification and the product is installed and finished.
04
Hand Over
Walk-through, warranty paperwork and remotes or certifier coordination as needed.
/ Fully licensed & insured / Local, family-owned business / Over 15 years experience / 90+ Google reviews
Frequently asked
Questions & Answers
For Gates & Automation
Yes. We match material, colour, capping profile, and hardware finish to the parent fence so the gate reads as part of the run rather than a separate piece. Bring a photo of the existing fence to the site visit and we’ll confirm the match.
Yes. Every driveway gate we build is engineered with the future Centsys motor load in mind. A future automation upgrade is a half day on site, no gate rework required. Read more here.
Stainless steel hinges, a lockable stainless latch, and a drop bolt on double leaf gates. Self closing soft close hinges and pool compliant gate hardware are available where the application calls for it.
Yes, under our Pool Fencing service. Pool gates require specific self closing self latching hardware and a 1500 mm minimum latch height under AS 1926.1, and we supply the gate, the hardware, and the certifier ready compliance summary as part of that service. Read more here.
A standard residential gate is typically fabricated and installed within 10 to 14 working days from quote acceptance. Custom designs, mixed material gates, and longer commercial spans run longer; we confirm the schedule at the quote.
Sloping driveways are normal on the Coast and we engineer the gate to suit. For swing gates, we either step the leaf or raise the gate slightly higher than a standard install to clear the high point of the arc. For sliding gates, the ground track is set level and the gate panel raked to match the boundary line.